HARDCOAT Concrete & Exposed Aggregate Sealer


A decorative sealer for concrete and exposed aggregate to help against weathering and staining. Apply by brush, roller or airless spray.

Use to seal plain, imprinted and coloured concrete and exposed aggregate. Easy to use.

Excellent UV stability. Can be recoated if necessary. Dries to a medium sheen (satin finish).

Touch dry in 30 minutes. Can be opened to foot traffic in 1 to 2 hours (external application with good drying conditions).

Resists weather, providing a clear, tough, easy to clean film. Contains a UV stabiliser to prevent yellowing in exterior applications.

Provides a dustproof surface. May be used on internal concrete surfaces (good ventilation and proper PPE required).

4 – 12m2 per litre per coat
(Coverage is approximate depending on surface porosity)

4 litre cans, 20 & 200 litre drums

 Click here to download HARDCOAT technical datasheet

 Click here to download HARDCOAT GREY technical datasheet

 Click here to download the STRATMORE GUIDE to SEALING CONCRETE

Product Catalogue: 
Product Catalogue: 

This website provides brief product descriptions of our products. Information is included for illustrative purposes only. It is not a product application guide. Do not use or specify our products without following the printed application guidelines on the current technical data sheets, product labels, material safety data sheets and any other supporting literature. We reserve the right to alter formulations without notice. Properties as stated were determined under controlled laboratory conditions. We give no guarantee of results of product use since conditions of use are beyond our control. Buyers and users are urged to make their own assessment of our products under their own conditions and for their own requirements. If you are a customer, then any contract with you is in accordance with our latest terms and conditions, which are available on request or can be downloaded from this website. Where goods are acquired for business purposes, the Consumer Guarantees Act 1993 does not apply. To the maximum extent permitted by law, we have no liability (whether statutory, in contract or negligence or otherwise) to buyers, users or specifiers of our products for any physical, direct or indirect damage, economic loss or any other loss or costs caused or contributed by us or any of our agents or employees in respect of any goods or services supplied. Also to the maximum extent permitted by law, all conditions and warranties expressed or implied by statute or common law, equity, trade custom or usage or otherwise howsoever are excluded. If, despite this, Stratmore Construction Solutions Limited is found to have any liability, then it is agreed that the liability is limited to the price of the relevant goods or services purchased.